 |
PŘEHLED ÚDAJŮ 03.01.2006 |
|||||||||||||
Tematherm AA 90 |
||||||||||||||
| TYP | A one component alkyd amino resin based stoving enamel. | |||||||||||||
| VHODNOST | A stoving enamel for metal industry. Suitable for steel, aluminium and zinc surfaces in interior premises. | |||||||||||||
| PŘÍKLADY POUŽITÍ | Used for painting lighting fixtures, trim panels and boards, metal furniture, household appliances and other equipment and machines. | |||||||||||||
| TECHNICKÉ ÚDAJE | ||||||||||||||
| Charakteristiky | Good gloss and colour retention. Available also in metallic shades. The product has MED (Marine Equipment Directive) certificate no 0809-MED-0355 and is thus accepted for painting surfaces inside the ships. | |||||||||||||
| Vzorníky barev | RAL, NCS, SSG, BS, MONICOLOR NOVA and SYMPHONY colour cards. TEMASPEED tinting. | |||||||||||||
| Kategorie lesku | 2. Lesklý | |||||||||||||
| Vydatnost |
Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated. |
|||||||||||||
| Ředidlo | 1024 | |||||||||||||
| Způsob nanášení | By spray, dip or flow coating. | |||||||||||||
| Doby zasychání |
Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation. |
|||||||||||||
| Objem sušiny | 50 ± 2 % volume (ISO 3233) | |||||||||||||
| Hustota | 1.0 - 1.2 kg / l depending on colour. | |||||||||||||
| Kód výrobku | 639-series | |||||||||||||
| NÁVOD K POUŽITÍ | ||||||||||||||
| Příprava | Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)
Phosphating and chromating improve adhesion and reduce corrosion under the paint film. Steel surfaces: Iron or zinc phosphating. Zinc surfaces: Zinc phosphating. Aluminium surfaces: Chromating. |
|||||||||||||
| Ošetření | By spray, dip or flow coating. Stir the paint thoroughly before use. For cold airless spraying, conventional spraying and dip or flow coating the paint should be thinned 20 vol-% to a viscosity of 20 - 25 s DIN 4 / 20 ºC. At conventional spraying also Dicco Thinner 1020 can be used. For hot airless spraying the paint should be thinned to a viscosity of 70 s DIN 4 / 20 ºC. Airless spray nozzle tip 0.009" - 0.013" and nozzle pressure 120 - 160 bar. Spray angle shall be chosen according to the shape of the object.
Stoving: The solvents should be allowed to flash off for a minimum of 10 minutes before stoving. Minimum stoving temperature is 150 ºC. Recommended stoving time, see page 1. Stoving time is dependent on the metal thickness, especially in convection ovens. The optimum stoving time and temperature for each oven and product can only be determined through experimentation. |
|||||||||||||
| Čištění nástrojů | Thinner 1006. | |||||||||||||
| Limitní hodnota platná v EU pro VOC dle směrnice 2004/42/ES | The Volatile Organic Compounds amount is 430 g/litre of paint.
VOC content of the paint (thinned 20 % by volume) is 495 g/l. |
|||||||||||||
| KLASIFIKACE VLIVU NA ZDRAVÍ A BEZPEČNOST | ||||||||||||||
| Containers are provided with safety labels, which should be observed. Further information about hazardous influences and protection are detailed in individual health and safety data sheets. A health and safety data sheet is available on request from Tikkurila Oy. | ||||||||||||||
| - | ||||||||||||||
Výše uvedené informace, založené na laboratorních testech a praktických zkušenostech, byly prokazatelně platné k datu vyznačenému v technickém listě výrobku. Kvalita výrobku je zajištěna naším provozním systémem, který vychází z požadavků norem ISO 9001 a ISO 14001. Jako výrobce nemůžeme zodpovídat za škody způsobené používáním výrobku v rozporu s našimi pokyny nebo pro nevhodné účely.
